wire mesh machineIt is generally composed of wire rack, wire feeding organization, filler organization, fishing organization, shuttle box, lower hook organization, tight knot organization and rolling net organization. The current application of Chinawire mesh machine, with imported machines as many, the structure is cumbersome and the price is more expensive.
The application of the wire mesh machine is to clearly propose a simple and low-cost construction.wire mesh machineto consider China'swire mesh machinedemand.
The current application of Chinawire mesh machineSome of the organizations to carry out improvements, practical technical measures below
a. The packing organization adopts a crankshaft with a downward orientation set on both sides of the front of the packing, and the lower part of the crankshaft is hinged with the respective swing arms. The rear end of the swing arm is developed according to the connection between the Shaft and the sound card frame. Set the calibration spring and the roller touching the camshaft fixed on the main shaft; set the crankshaft with the rear orientation facing backward on both sides of the packing, the rear end of the crankshaft is respectively hinged with the respective swing arm. The swing arm is sleeved on the transmission shaft located on the upper side of the main shaft. A roller that touches the camshaft fixed on the main shaft is set up under the swing arm. Set up a calibration spring yellow on the swing arm; a crankshaft parallel to the filler is also set up on the filler. The front end of the swing arm between the edges of the crankshaft is hinged. The rear end of the swing arm is connected with the sound card according to the shaft, set up a roller on the swing arm that touches the groove camshaft fixed on the drive shaft, and set up a transmission gear on the drive shaft that engages with the transmission gear on the main shaft;
B. The fishing organization adopts a gear rack on the fishing upper seat, a transmission gear engaged with the gear rack at the upper end of each fishing upper seat, a fixed connection between the gear rack and a sliding sleeve set on the fishing upper seat shaft, a swing rod behind the sliding sleeve, a roller touching the sliding sleeve groove is developed at the front end of the fishing net machine swing rod, and a rack connected with the sound card is developed at the rear end of the swing rod according to the shaft, set up a roller in the middle of the swing rod that touches the camshaft fixed on the drive shaft, and set up a shaking arm on the upper seat shaft that touches the outer circle of the camshaft fixed on the drive shaft. Set up a calibration spring on the swing arm;
c. Tight knot organization adopts setting shaking arms on both sides of its tight knot stick respectively. The lower part of the shaking arms is fixed on both sides of the supporting point shaft. Calibration elastic yellow and bump are set on the shaking arms. The rotating arms intermittently colliding with the bump are fixed on the main shaft. A swing rod is set on one side of the main shaft. The upper part of the swing rod is set with calibration elastic yellow. The lower part is connected with the sound card frame according to the Shaw axis, the roller touching the camshaft fixed on the main shaft and the upper buffer disk are set on the swing rod, and the lower buffer disk is fixed on the supporting point shaft;
d. The roll net organization adopts a secondary roll net stick set on one side of the main roll net stick, the two are connected by a transmission chain, a pressure stick is set on the upper side of the two, an overrunning clutch is set on both sides of the main roll net stick, a calibration spring is set on the overrunning clutch, the front end development of the crankshaft is connected with the overrunning clutch, the rear end development is connected with the swing arm, and the upper part of the fixed and adjustable seat on the sound card frame, the lower part is connected with the sound card frame according to the Xiao axis, the swing arm is provided with a roller, and the camshaft intermittently colliding with the roller is fixed on the main shaft.