medium and largeFlangeRefers to exceeding the specifications required by the relevant laws and regulationsFlange. Generally refers to the specifications above DN2000FlangeDisc. Such products are all electric welding products, and there is no screw thread. The specifications and models of screw thread products are often DN15-DN100. NationalFlangeThe large specification of the working pressure specification of 0.25MPa to 1.5Mpa in GB/T9119-2010 is DN2000. What must be paid attention to in the whole process of transportation of flange manufacturers? Here people come to give us a detailed introduction.
medium and largeFlangeCommon Problems of Factory Transportation
medium and largeFlangeFor products above 3 meters (inclusive), pay attention to transportation when booking contracts:
1. Flanges should be manufactured by the processing technology of section production. Then to the construction of the project on the spot to carry out patchwork.
2. The limit height of expressway or general overpass is 4.5 meters. The flange itself is 3 meters in diameter, and then the height of the truck itself is about 1.5 meters, it will not be able to walk through.
3, coated with anti-rust agent with wooden packing box or copper woven belt wrapped, depending on the situation.
4, if the horizontal transportation, 3M large and medium-sizedFlangeIt will also exceed the total width of the motorway, so it is a problem whether it is vertical or horizontal transportation. The delivery problem is not very good, which will lead to some difficulties in transportation.

Raoyang Jinglian Machinery Manufacturing Co., Ltd. is located in Hengshui City, Hebei Province. It has been engaged in the machinery manufacturing industry for more than 40 years; the main products are: wire mesh looms, wire braiding machines, automobile transmission parts, wire mesh braiding machines, Agricultural machinery parts, railway parts, compaction paver parts, etc.; welcome customers to inquire!