Paver eccentric shaft custom processingThe paver has the functions of vibration, paving, lifting mud and leveling. Its main body is an eccentric vibrating shaft for vibrating, paving and lifting mud, and two circular spindles for driving and leveling.

When the slump of the condensed soil mixture is small or the cloth height is too high, there will be too much mixture accumulation in the front of the vibration axis. When the three-roll machine moves forward, the phenomenon of "climbing" will occur due to blockage, resulting in uneven surface of the mixture.

Paver The concrete pavement paver of the eccentric shaft processing plant may not reach the set speed and amplitude due to long-term wear, or may bend and deform, causing waves on the road surface and failing to meet the flatness requirements. Therefore, regular inspection and maintenance must be paid attention.

Paver eccentric shaft custom processingThe paver body is light, simple and flexible operation, and has strong paving ability. If there is enough material supply, the paving speed can reach 40-50 linear meters/hour. According to this calculation, the paving capacity of the two three-roller machines is equivalent to that of a large track paver or a slipform paver.

Paver eccentric shaft custom processingFeatures of the paver:

1. The vibrator is used for vibration and mud lifting, with high vibration frequency and good compaction effect;

2. The paving mechanism can realize the paving balance of concrete materials, save manpower and have high paving efficiency;

3. The efficient vibration mechanism can make the concrete reach a flowing state, thereby effectively ensuring the compactness of the concrete, especially for the concrete with low slump, it can also achieve the ideal compaction and leveling effect.

4. Meters paver 5 meters concrete leveler 6 meters three-roller paver 8 meters concrete paver 10 meters bridge deck paver 11 meters wide bridge deck paver, can reach 18 meters.

Paver eccentric shaft custom processingThe three-roller paver integrates paving, leveling, vibration, mud lifting and leveling functions, and has the characteristics of one machine with multiple functions. The series models adopt an integral structure and do not need to be reassembled. The roller shaft is connected by flange, the vibrating roller shaft and the spiral roller shaft can be adjusted up and down, the structure is reasonable, the performance is stable, the failure rate is low, and the maintenance is convenient. For roads of different widths, only the one suitable for the road needs to be replaced.eccentric shaftThere is no need to re-purchase the entire machine.