Paver eccentric shaft custom processing

Paver eccentric shaft custom processing paver with vibration, paving, lifting mud and leveling function. Its main body is an eccentric vibrating shaft for vibrating, paving and lifting mud, and two circular spindles for driving and leveling.

2020-10-21

Paver eccentric shaft custom processing: paver characteristics

Paver The paver customized for eccentric shaft processing is a mid-range machine between ordinary small machines and slipform pavers. It consists of 2 drives and 3 shafts. The first drive drives the first eccentric shaft to rotate to complete the paving and vibration functions; the second drive drives the two shafts to rotate, driving the entire machine to move back and forth or stop.

2020-10-27

What are the finishing requirements for shaft castings?

Shaft parts are one of the common typical parts. According to the different structures of the shaft parts, they can generally be divided into three categories: optical axis, stepped shaft and special-shaped shaft. Or for solid shaft, hollow shaft, etc. They are used in machines to support transmission components, such as gears and pulleys, to transmit torque or motion. The processing technology of stepped shaft is more typical, which reflects most of the contents and basic laws of the finishing technology of shaft castings.

2020-11-09

Process steps of deep processing of drive shaft

The shaft is an important part of the mechanical structure. It supports the rotation of other rotating parts (such as gears, pulleys, etc.) and transmits motion and power. At the same time, it is connected to the machine channel through bearings (rolling bearings and sliding bearings). All parts of the shaft 1 are rotated about the shaft, thereby forming a shaft-based assembled shaft assembly. In the design of the shaft, not only the shaft itself, but also the entire structure of the shaft system components must be tightly connected.

2020-11-20

Correction method of CNC mechanical parts processing

In the production environment, the unstable temperature conditions of CNC mechanical parts processing may lead to the instability and thermal elasticity of component geometry, time and position. In order to cause errors in processing and measurement, especially when the key feature parts of large parts are not closed and tested correctly. Thermal expansion is usually proportional to the size of the part, but this relationship does not apply to certain tolerances, such as turbine rotation, turbine, housing, gear teeth, etc.

2020-12-07

Construction machinery accessories: what is the servo motor controller? What is the role?

Engineering machinery parts servo motor controller is an electronic product that can send uniform pulse signals. After the signal it sends enters the stepper motor driver, the driver will convert it into the strong current signal required by the stepper motor to drive the stepper motor to run. The servo motor controller can control the motor to rotate at every angle.

2021-01-06

What should be paid attention to when the automatic weaving machine stops?

Nowadays, the level of various fields is getting higher and higher, and the problem of anti-fouling of machinery and equipment has also caused many people to attach great importance to it. The display of automatic weaving machine has replaced the influence of general weaving skills, the difficulty coefficient of manual service weaving is large, the consumption of human resources and material resources has disappeared, and the output power is not high. A knitting machine that works 24 hours a day can produce dozens or even hundreds of times the output power of technical weaving.

2021-07-14

Advantages and Disadvantages of the installation of the transmission flange

The installation of the actuator flange has advantages in comfort, but may have a large number of disadvantages in safety factor. The advantages and disadvantages of adding flanges. In terms of comfort: some 1. car body posture is not very good. After installing flanges, the wheels will slightly protrude, making the car more sporty in appearance. Especially when it comes to vehicles that have been modified with a wide body, this problem can be handled to the utmost. 2. the transmission flange is installed and the coaxial output wheelbase is expanded, the drifting and roll feeling of the vehicle during high-speed driving and sharp corners will be significantly improved.

2021-07-28

Analysis of Flange Machining Process

The flange connection is a detachable connection. The flange is provided with holes and can be threaded with bolts to make the two flanges tightly connected, and the flanges are sealed with gaskets. According to the connected components can be divided into vessel flange and pipe flange

2021-08-12

Gold steel mesh weaving machine manufacturers to introduce the mesh weaving machine maintenance

Some parts of the net braiding machine, such as the spindle bracket, the sliding base, etc., ensure the accurate distance between the sliding base and the lower spindle braiding line when checking and disassembling or replacing new parts and reassembling. It is recommended to place a slider and The spindle to run on the sliding turntable to prevent the lower spindle braiding line from being stuck or cut off by the slider when it is introduced into the knitted fabric from the swing rod.

2021-08-27